miniLAB 1008 User's Guide
Calibrating and Testing the Device
The
Board Calibration
dialog opens, followed by the
Channel Select
dialog. This
dialog displays the date when the miniLAB 1008 was last calibrated. If the
miniLAB 1008 was calibrated within the previous six months, it may not need
calibrating.
The
Channel Selection
dialog automatically opens after the
Board Calibration
dialog.
By default, all of the analog input channels are selected for calibration. To calibrate
specific channels, click on the
Unselect All
button to remove the check mark from
each channel (the button label also changes to
Select All
), and then click in the
check box of the channel(s) you want to calibrate. The dialog dynamically updates
with the pin numbers of the channel(s) to connect to a ground terminal (
GND
).
This procedure shows you how to calibrate all of the analog input channels.
3.
Connect each analog input (pin CH0, CH1, CH2, CH3, CH4, CH5, CH6 and CH7)
to one or more ground
(
GND
) terminals, as directed in the
Channel
Selection
dialog.
5-2