Meade Deep Sky Imager, Руководство пользователя, Страница: 6 / 58

6
To connect the Deep Sky Imager camera to an ETX Telescope :
• While looking at the back of the telescope, orient the Deep Sky Imager camera into the eyepiece holder so
that the USB cable points to the left of the telescope’s optical tube.
To connect the Deep Sky Imager camera to an LX-200
®
or LX-90
®
Telescope :
• While looking at the back of the telescope, orient the Deep Sky Imager camera into the eyepiece holder so
that the USB cable points to the right of the telescope’s optical tube.
To connect the Deep Sky Imager camera to other telescopes :
• Move the Deep Sky Imager camera around in the eyepiece holder until the image on the Deep Sky Imager
display screen (39) is upright.
To connect the Deep Sky Imager camera as an autoguider :
• Attach the correct serial cable from the telescope’s control panel RS-232 port to the comm port of your PC
(see the Autoguider instruction sheet for more information). Also see “Autoguider and Telescope Controls,”
page 31, for more information.
• Click on the telescope tab (16). Enter the PC’s comm port number or Netscope Server.
• Click the Connect button (27).
Connect the Deep Sky Imager Camera to Your Telescope