Meade Deep Sky Imager, Руководство пользователя, Страница: 31 / 58

Autoguider and Telescope Controls 1
31
For users familiar with the product, the Deep Sky Imager camera functions in a manner similar to the Meade
Pictor 201XT CCD Autoguider.
An autoguider helps keep an object centered so that a 35mm camera can take long exposures of an image.
Note that you do not have to set the Deep Sky Imager camera for a long exposure using Exposure
controls (2). Autoguiding is used typically with telescope mounted in the equatorial mode, although it
can also be used with LX200GPS Telescope mounted in the alt/az mode.
To use the Deep Sky Imager camera as an autoguider, perform the following procedure. You will need an
off-axis guider (see the
Meade General Catalog for more information) and the supplied serial cable that is
appropriate for your model telescope. You will also need to know the focal length of your telescope.
1. Attach the off-axis guider and your 35mm camera to your
telescope as described in that product’s instruction manual. Insert
and tighten the Deep Sky Imager into the eyepiece holder.
2. Click on the Telescope tab.
3. Attach one end of the serial cable to one of your PC’s comm ports and the
other end to the telescope’s RS-232 port.
4. Type in the comm port number into comm port box.
5. Click the Connect button (it will then display “Disconnect”). The buttons
below the Connect button become active and status data is displayed, such
as which version of Autostar is connected, whether your telescope can
Autoguide or just track, and so forth. If the telescope is capable of
autoguiding, “Can AutoGuide” will display.
6. Check to make sure your cable is properly attached, that you have the correct port
number selected and so forth. If the telescope connection is verified, you will receive a “passed” message.
more....