manualshive.com logo in svg

Meaco MeacoMist Deluxe, Инструкция по эксплуатации, Страница: 8 / 17

Поделиться
Скачать
Meaco MeacoMist Deluxe Скачать руководство пользователя страница 8

 

8

 

 

TIMER

 

Press the Timer Button to set an Off Timer between 1 and 10 hours. Continue pressing the 

Timer Button until the desired number of hours is reached, the set number will flash three times and 
then the display will change back to the room temperature. H will appear on the display to confirm the 
Timer has been set. The machine will automatically stop running after the set number of hours. To see 
the remaining number of hours at any point, press the Timer Button and the number will appear on the 
display.  

 

UV LAMP

 

Press the UV/Ioniser Button to turn the UV lamp on. This function will kill bacteria in the water. 
The UV icon will appear on the display to confirm that the UV lamp is on. Press the UV/Ioniser 

Button  again  to  turn  the  UV  lamp  off.  The  UV  lamp  turns  off  when  the  tank  is  removed  from  the 
base. Never try and look directly at an UV lamp when in use as it could damage your eyesight. 

 

IONISER

 

Hold the UV/Ioniser Button down for 3 seconds to turn the ioniser on. This function will absorb 
dust particles in the air. The plus and minus icon will appear on the display to confirm that the 

ioniser is on. Hold the UV/Ioniser Button down again for 3 seconds to turn the ioniser off. 

 

 

WARM MIST 

Press the Warm Mist Button to start the warm mist function. The PTC element in the machine 

will  start  working  and  the  mist  will  become  warm.  Three  vertical  lines  will  appear  on  the  display  to 
confirm that warm mist has been set. Activating warm mist will increase the humidification output. Press 
the Warm Mist Button again to stop this function. When the warm mist function is off, the machine will 
dispense cool mist. 

 

 

MIST LEVEL

 

Press the Mist Level Button to change the humidification output level. Output Level 1, 2 or 3 

can be chosen (Level 1 is the lowest and Level 3 is the highest). Three horizontal lines on the left-hand 
side of the display will indicate which mist level has been chosen.   

 

HUMIDSTAT

 

Press the Humidistat Button to set your desired humidity target, the set number will flash three 
times  and  then  the  display  will  change  back  to  the  humidity  level  in  the  environment.  The 

humidity  target  can  be  adjusted  between  40%rh  and  80%rh.  The  machine  will  run  until  the  desired 
humidity target is reached. Please note, when the machine starts working, it will humidify for 2 minutes 
regardless of the humidity level in the room.  

 

NO WATER

 

The icon to the left will appear on the display when there is no water in the water tank.  The 
unit will automatically stop running.  

 

 

Содержание MeacoMist Deluxe


















Отзывы:

Нет отзывов