Me R189, Руководство пользователя

Страница: 81 / 100

- 80 -
7.1.1. General EAS
To construct and send an EAS alert, you need to set six items on the General
EAS page:
•
The EAS alert code;
•
The starting time (effective time) of the alert;
•
The alert duration
•
The FIPS locations codes for the alert;
•
The audio message, if any, for the alert.
•
The audio announcement message, if any that will precede and follow the
alert.
The values for these items are presented using pull-down and selection menus.
Select EAS Code
To set the EAS code, select from the codes presented under the Select
Available EAS Code pull-down menu. The codes shown are the ones that
were added to the list on the Setup >Encoder screen. If the list needs to be
corrected, use the link Select Available EAS Code to return to the Setup >
Encoder screen. Configure Available EAS Types for Encoder as needed.
See section 5.9. Then return to the Encoder >Send EAS >General page to
continue constructing the alert. NOTE: Only specially configured One-Net’s
will allow origination of the National alerts Emergency Action Notification &
Termination (EAN & EAT).