manualshive.com logo in svg

Me R189, Руководство пользователя

Поделиться
Скачать
Me R189 Скачать руководство пользователя страница 40

 

- 39 - 

NOTE:

 The interface pages for Decoder and Encoder Audio display and 

reference audio output levels for certain features. These references always 
provide an active hyperlink into this page to allow for changes to audio output 
levels. 

 

To test the Main and/or Auxiliary Audio outputs, attach speakers to the One-
Net audio device output ports and run the various tone test buttons.  The Front 
Panel Speaker can be tested as is.  These tests allow the One-Net to play each 
of the two single tones that comprise the dual-tone EAS Attention Signal. The 
EAS Attention signal and WAV files can also be played.  The duration of the 
test is set per Audio device by the 

Test Tone Duration

 fields. 

 

Audio tests, audio levels and duration changes occur immediately. 

 

Alert Audio toggles 

The Main and Auxiliary Audio displays also display with an active hyperlink 
if alert audio from originated and forwarded alerts is enabled. Clicking these 
links will jump to the correct Decoder and Encoder Audio setup page for 
changes to be made. 

 

Upload Audio .WAV file to One-Net Server

 

This interface allows Wav files to be uploaded into the One-Net. Uploaded 
audio files are available for tests as well as for encoding and manual 
forwarding. 

5.6.2. Decoder 

Audio 

 

There are three features provided to configure decoder audio:  Alert Decoding, 
Decoder Audio Monitoring, and Alert Forwarding.   
 
Each One-Net EAS decoder channel can be independently tuned for input 
sensitivity, and also can be enabled and disabled with the provided interfaces.  
The audio devices used during alert forwarding are also configured from this 
screen.  

 

 
 
 
 
 
 
 
 

Содержание R189





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды