Me CUVEO CR-UPS2000, Руководство пользователя

Страница: 15 / 44

EN
15
c.) Both external screw terminals serve as the
supply line of the mains voltage (“N” =
neutral conduction, “L” = phase).
d.) The wireless flush-mount switch can be
screwed tight using lateral mounting lugs
(hole spacing of the mounting lugs = 60 mm).
e.) The wireless flush-mount switch can also
be installed directly into a flush mounted
socket or a surface mounted socket. Please
ensure during the installation that the button
at the back of the casing is exposed and not
accidentally activated.
f.) The switch at the back of the casing is
intended for the configuration of a wireless
transmitter of the Cuveo system. For that
reason, please read the following sections
before sealing the flush mounted socket
or the surface mounted socket and before
undertaking the initial operation.
INITIAL OPERATION
Configuring the wireless
flush-mount switch for a
wireless transmitter
a.) Plug the wireless flush-mount switch into
a regular 230 VAC mains voltage in the
manner indicated in the above section.
b.) Press button (2) until LED (1) flashes red.
c.) Before LED (1) stops flashing, press the
“ON” button of the desired switch channel
on the wireless transmitter for which
the wireless flush-mount switch is being
configured. The red LED (1) flashes. This
indicates that the configuration process
has been successfully completed.