Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential
for strong bass response. When connecting, make sure that positive (+) from the
amplifier is connected to the positive (+) of the speaker, and the same for negative (-).
S
PEAKER CONNECTIONS
9
SINGLE 4 OHM SPEAKER
SPEAKER
FUSE
POWER
+12V
REM
GND
20A
20A
20A
20A
4 Ohm Speaker
4 Ohm Speaker
+
+
-
-
CAUTION!
The amplifier must see a 2 Ohm load or higher. Any lower than 2 Ohms will
cause the amplifier to overheat and possibly cause permanent damage to the amplifier!
TWO 4 OHM SPEAKERS IN PARALLEL (2 Ohm)
SPEAKER
FUSE
POWER
+12V
REM
GND
20A
20A
20A
20A
4 Ohm Speaker
4 Ohm Speaker
+
+
-
-
4 Ohm Speaker
4 Ohm Speaker
+
+
-
-
