MDH Vitea Care Premium DRVG0N, Инструкция по эксплуатации

Страница: 11 / 44

MODEL: PROMYK SPECIAL
LANGUAGE: ENGLISH VERSION: 2021-03
VITEACARE.COM 11
aa) Keep extreme caution while passing an obstacles. Extreme use of the stroller could
cause damage or destroy it.
bb) Never use the stroller as a seat for the transportation of people in cars, buses or any
motor vehicles.
cc) During transport (eg. In the trunk), do not burden stroller, it may weaken or damage its
structure.
dd) Do not leave the stroller with the user close to open sources of fire.
ee) Be aware that the surface temperature of the upholstery and the frame parts may
be increased after exposure to the sun or other heat source. Furthermore, with low
temperatures there is a danger of overcooling metal parts of stroller. It may cause burns or
frostbite parts of the body.
ff) Keep caution while moving on sloping surfaces. The maximum allowable slope angle up
and down is 5%.
gg) With the stroller you can only use on surfaces where all four wheels touching the
ground.
hh) Stroller is designed for use indoors and outdoors only on paved and even surfaces.
ii) Use of the product i.e. The ice, wet, greasy, strongly gritty surfaces is unacceptable - it
creates a risk of falling.
jj) It is extremely important to keep all strollers components clean in order to maintain the
product parameters.
kk) Do not add additional loads (bags, etc.) on the stroller handles.
ll) Storing the stroller in areas with very high humidity (baths, laundry, etc.) or in the open
air, also the lack of hygiene causes rapid loss of operating parameters and aesthetic of the
product.
mm) Accessories, which were not approved by the manufacturer are not included in this
manual, cannot be used.
nn) Do not leave the child in the stroller for longer, because persons with neurological
affections who stay in unchanged positions may experience problems with skin nourishment
and cause bedsores.
oo) When the footrests will not be removed before folding the stroller, itcan cause damage.
During use, handing of the product and during its assembly, regulating mechanisms,
it might happen trapping and/or squeeze user’s or caretaker’s body part in holes/gaps
between the elements. Perform these steps with extreme caution. After adjustment,
stabilize the position by carefully tightening the nuts/bolts.