MDG theONE 1.30, Руководство пользователя

Страница: 30 / 45

theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f 30 / 45
T
OURING
R
ACK
The MDG rack of the Touring version is made of 6061-T6 aluminum
tubing (1.5” nominal) and plates.
The rack is equipped with the following:

a 20 L (5.28 US gal.) bottle of MDG Neutral fog fluid

an external fan

Four (4) swivel caster wheels with a load capacity of 133 kg (330 lbs)
per wheel. Two wheels have a full brake.

A tool drawer.
The rack can be equipped with any kind of gas bottles, from 150 to 200 mm (6" to 8") in
diameter, with a maximal height of 915 mm (36").
A series of high pressure pigtails allows the user to connect the most common standard CO
2
bottles to the MDG theONE .
The MDG Touring rack is engineered to hook under a truss with all the following components:
-
theONE fog generator
- Two (2) gas bottles, fully loaded
- One (1) fluid reservoir 20 L (5.28 US gal), fully loaded of MDG Neutral fluid
- External MDG fan.
The total weight is around 120 kg (265 lb). See Rigging the Touring Rack paragraph for
details.
The MDG Touring rack is also engineered to be stacked on another MDG Touring rack. See
Stacking the Touring Rack paragraph for details.
WARNING
Users should inspect the rack for any bends, bumps, cracks, holes, etc, that might
have been caused to the frame by abuse or inadequate storage and handling.
Do not use damaged structures until a thorough inspection and /or repair
procedures is carried out.
WARNING
Severe load conditions such as shocks due to the unit being dropped, impacted by
handling equipment, uneven loads, and wind loads have not been analyzed since
there was no specific requests by the end customer.
These loads could cause permanent damage and this could lead to
premature failure under more normal operating conditions.