MDG theONE 1.30, Руководство пользователя

Страница: 15 / 45

theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f 15 / 45
The tree menu architecture is explained below. Items highlighted in blue are state menu ( - ), and
those highlighted in yellow are control menu (

).
STATUS
Status menu
STATE ----
Status State string
UNIT OFF
- the generator is
off
xx% HEAT
- the generator is heating , but not ready
PURGE
- the generator is purging the heating module
READY
- the generator is generator is
ready
to produce fog
FOG ON
- the generator is producing Fog
VENT
- the generator is venting the internal reservoir
FAIL
- the generator is off, due to a failure (see Diagnostic)
ERROR ----
Error
message when
State = FAIL
(see Diagnostic)
MODE ----
Mode status
HAZE
- Haze mode
FOG
-
Fog
mode
TEMP. ----
Temperature status (heating module)
TOO LOW
- temperature too low
OK
- temperature within specifications (
ready
)
TOO HIGH
- temperature
too high
PRESSURE xx.x
Current reservoir pressure
LEVEL ----
Lower / Upper liquid level
LO / LO
- the liquid level is below the lower level
HI / LO
- the liquid level is above the lower level, but below
the upper level
HI / HI
- the liquid level is above the upper level
RUN TIME xx.x
Total Run Time (decimal hour)
HAZE TIME xx.x
Total Haze Time (decimal hour)
FOG TIME xx.x
Total Fog Time (decimal hour)
LAST ERR. xxxxx
Five Last Errors (see Troubleshooting)
CONTROL
Control menu
UNIT ----
Unit toggle
OFF
- the generator is
off
ON
- the generator is on
HAZE/FOG ----
Fog toggle
OFF
- the haze/fog is
off
ON
- the haze/fog is on
MODE ----
Mode toggle