MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
34
Power Outfeed
terminal block is used to make the installation and maintenance of the
system’s components easer. Using a terminal block allows connections to be
added, changed, or removed without the risk of any other connections
loosening.
One of the power supply’s
+V
outfeeds, and one of the
-V
outfeeds is connected up to the terminal block where the
power will be distributed.
7.
-V
is connected to the other side of the
terminal block using a white or black wire.
That same colour wire is then used to cascade
the -V side of the power to the next 4
terminals.
8.
+V
is connected to one side of the terminal
block using a red wire, and then that same
colour wire is used to then cascade the +V
side of the power to the next 4 terminals.
Conductor Type
Stranded or solid copper
Conductor Size
20 or 22 AWG
Cable Size
2 conductors / cable
304
201
204
