MDC XH 2021 Скачать руководство пользователя

Страница: 18 / 76

www.mdcusa.com

Ph: 833 632 8721

Propane Cylinder Safety

•

Propane Gas cylinders have a 12-year lifespan between inspection and re-certification. Always use

gas cylinders that are within their compliance date.

•

For drawbar mounted cylinders (if applicable), orient the cylinder relief valves of both cylinders

discharge away from both the trailer and towing vehicle as shown.

•

Always remove the propane cylinder from the trailer to refill.

•

Propane tanks may only be filled to 80% capacity. DO NOT OVER FILL.

•

For gas cylinders stored in a dedicated Propane Gas Locker ensure the locker is kept closed at all

times unless changing or operating the cylinders.

•

Close cylinder valves when appliances are not in use or while refueling is in progress.

•

Ensure cylinder valves are closed to prevent the unintended release of gas from a cylinder.

Discharge

45˚

Cylinder
relief valve

Discharge

45˚

Car

Camper

Gas Appliance Safety

•

Gas appliances are certified and have a flame safeguard feature to stop gas flow in the event of the

flame going out. Never interfere with this function or replace appliances with a non-certified type.

•

Slide-out kitchens with cookers should only be operated with an annex fully erected. Failing to do so

may affect the safety and operation of the gas appliance.

•

Slide-out kitchens with cookers must only be used with a flexible connecting hose that is disconnected

from the gas bayonet fitting when in its stored position. Under no circumstances permanently connect

this appliance.

•

Only approved and suitable gas appliances with flame safeguard systems shall be connected to the

gas bayonet (if fitted).

Содержание XH 2021













































































Результаты поиска

Содержание XH 2021

Отзывы:

Похожие инструкции для XH 2021

Бренды по названию

Популярные бренды

MDC XH 2021, Руководство пользователя

Результаты поиска

Содержание XH 2021

Отзывы:

Похожие инструкции для XH 2021

Бренды по названию

Популярные бренды