MDC XH 2021 страница 15 Скачать руководство пользователя

Страница: 15 / 76

www.mdcusa.com

Ph: 833 632 8721

Additional Information on Light Truck Tires

Please refer to the following diagram.

Tires for light trucks have other markings besides those found on the sidewalls of passenger tires.

The “LT” indicates the tire is for light trucks or trailers.

An “ST” is an indication the tire is for trailer use only.

Max. Load Dual kg (lbs) at kPa (psi) Cold

This information indicates the maximum load and tire pressure when the tire is used as a dual, that is, when four
tires are put on each rear axle (a total of six or more tires on the vehicle).

Max. Load Single kg (lbs) at kPa (psi) Cold

This information indicates the maximum load and tire pressure when the tire is used as a single.

Load Range

This information identifies the tire’s load-carrying capabilities and its inflation limits.

Tire Safety Tips

Preventing Tire Damage

•

Slow down if you have to go over a pothole or other object in the road.

•

Do not run over curbs or other foreign objects in the roadway and try not to strike the curb when

parking.

Tire Safety Checklist
•

Check tire pressure regularly (at least once a month), including the spare.

•

Inspect tires for uneven wear patterns on the tread, cracks, foreign objects, or other signs of wear

or trauma.

•

Remove bits of glass and foreign objects wedged in the tread.

•

Make sure your tire valves have valve caps.

•

Check tire pressure before going on a long trip.

•

Do not overload your vehicle. Check the Tire Information and Loading Placard or User’s Manual for

the maximum recommended load for the vehicle.

Содержание XH 2021













































































Результаты поиска

Содержание XH 2021

Отзывы:

Похожие инструкции для XH 2021

Бренды по названию

Популярные бренды

MDC XH 2021, Руководство пользователя

Результаты поиска

Содержание XH 2021

Отзывы:

Похожие инструкции для XH 2021

Бренды по названию

Популярные бренды