
English
INFLATION - OPTION 1
WS700Y22001
4
(Continued on the next page)
www.medalsports.com
Step 2: Remove the valve cap and
ensure the pin is in the Up position.
STEP 2
STEP 3
Step 6: Screw on the cap.
(It is normal to hear a small burst of
air when removing the hose.)
STEP 6
Note: When the pump's
air pressure reaches 5 psi,
you can unplug the air
nozzle for easier inflation.
FIG. 1
1
x1
x1
5
x1
6
Step 3: Screw the pump hose onto the
Inflation port (INFLATE).
5
6
Step 1: Unroll the paddle board on level
ground with the air valve facing up.
STEP 1
1
Step 4: Insert the other end to the
air valve and twist clockwise to
low (lo).
STEP 4
6
STEP 5
Step 5: Pump the board with steady
strokes until the pressure gauge
reads 10-15psi.
1
5
1
1
1
5
IMPORTANT
Do NOT exceed 15 PSI.
PRESSURE GAUGE
IMPORTANT
Do not point air valve towards face when
inflating or deflating.