
English
HOW TO APPLY PATCH
WS700Y22001
10
(Continued on the next page)
www.medalsports.com
STORAGE - DISASSEMBLING THE FIN
Deflate the board completely before applying a patch.
For Tears (< 10 mm)
1. Locate the leak using soapy water.
2. Wipe clean and dry.
3. Make an outline of the patch with a pen.
4. Cut a suitably sized patch.
5. Apply glue to the patch and to the paddleboard leak area. Wait for 1 minute.
6. Attach the patch over the tear and hold for 2 minutes.
7. Wait 48 hours before re-inflating.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 3
Step 1: Remove the clip.
7
STEP 2
Step 2: Slide the fin out of its base.
7
Step 3: Insert the anti-deformation gasket.