MCZ CLUB HYDRO, Руководство по эксплуатации и обслуживанию

Страница: 37 / 67

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
4.5.
DISPLAY PANEL AND COMMANDS
4.5.1.
Control panel logic
Reported below are some useful information to understand the
navigation logic and use the control panel:
The luminosity of the control panel is switched off after about
30” seconds of the keyboard being inactive. To switch on the
back lighting again just press any of the buttons on the panel.
The first screen that appears displays the operating status of
the stove (ON, OFF, LIGHTING, SHUTDOWN..) that alternates
with any other settings activated (TIMER, SLEEP, AUTO ECO..)
By pressing any of the 4 keys around the display (C D E F) you
access the stove's operation settings screen (level of the flame,
fan, set temperature, manual or automatic mode..). From this
level the 4 keys around the display assume “dedicated”
functions, i.e. they directly refer to the corresponding words
that appear in the 4 corners of the display (e.g.: the word in
the top right hand corner refers to the D key).
When a setting is modified in any menu level without
confirming the modification using the “OK” key and leaving the
keypad inactive for some seconds, the initial screen reappears
and the modifications are not saved.
If from any menu level the on/off (B) key is briefly pressed, the
display is automatically taken back to the initial screen (stove
operating status) without saving any modifications not
confirmed with the “OK” key.