MCZ Athos Power HYDRO, Инструкция по установке и эксплуатации

Страница: 21 / 65

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL
page
21
Installation and assembly Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
198
364
28
1
35
0
Ø80
Ø48 11
2
0
578
64
3
3.1.5. ATHOS HYDRO Dimensions
3.1.6. TECHNICAL CHARACTERISTICS
Technical specifications Athos Hydro
Overall thermal power Max. 14.0 kW (12040 kcal/h) / 10.4 kW (8944 kcal/h)
Overall thermal power Min. 4.0 kW (3440 kcal/h) / 1.4 kW (1204 kcal/h)
Yield at maximum 91 %
Yield at minimum 94 %
Temperature of exhaust smoke at maximum 190°C
Temperature of exhaust smoke at minimum 90°C
CO at 13%O
²
at minimum and maximum 0.045 — 0.017%
CO
2
at minimum and maximum 3.4% – 5.9%
Mass of smoke at minimum and maximum 8.3 – 16,7 g/sec
Minimum draught at maximum power 0.10 mbar – 10 Pa
Minimum draught at minimum power 0.05 mbar – 5 Pa
Hopper capacity 52 litres
Fuel pellet type Pellet diameter 6-8 mm. Length range 5-30 mm
Pellet consumption per hour Min ~ 0.8 kg/h * Max. ~ 3 kg/h *
Operating time between re-fuelling At min~ 43 h * At max. ~ 12 h *
Heatable volume m
3
301/40 – 344/35 – 401/30 **
Combustion air inlet External diameter 50 mm.
Smoke outlet External diameter 80 mm.
Maximum absorbed electrical power Max 300 W – Med 120 W
Power supply frequency and voltage 230 Volts / 50 Hz
Net weight 200 kg
Weight with packaging 210 kg
*Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/h for m
3 40-35-30 (respectively 40-35-30 Kcal/h for m 3 )
Appliance suitable for installation in a shared flue.