IM 934-2 Applied PDAA/PDHA / Page 14 of 44
Finished Floor
or Carpet
Panel Wall Construction Type
For panel wall and thin wall construction, it is
recommended that a louver frame be used (See Louver
Frame Installation For Thin Wall Types on page 11,
and figures 19, 20 & 21).
Panel wall and thin wall construction varies only
slightly from frame and brick construction.
Note: The
center of gravity is 10" (260mm) from the rear face of
the wall sleeve. The wall sleeve must be inserted into
the wall at least 10" (260mm) or other support must
be employed.
Support can be from a factory supplied
subbase or from other field supplied materials.
Installation for this application is as follows (Figures
19, 20, & 21).
1. Clean the opening of all debris that may interfere
with installation.
2. If the unit is to be supplied with a subbase, install
subbase before installing wall sleeve (see IM 936).
3. If the optional drain kit is to be employed, see IM
942.
4. Be sure the wall sleeve is mechanically attached
to the wall and caulked to assure a proper seat. It
is recommended that the louver frame be used for
this purpose.
Figure 16. Frame and brick with electrical subbase
Note: Standard subbase is available in 3" or 4"
(76 mm or 102 mm) height. Leveling legs
provide adjustment of 1" (25 mm)
.
Steel Lintel
(by others)
4
3
/
8
"
(111mm)
Outside
Louver
Mounting
Holes
(by installer)
8
1
/
4
"
(209mm)
Caulk Perimeter
both Indoor and
Outdoor Before
Installing Louver
Power Supply Connect
(Alternate Entry)
Leveling
Leg
Finished Floor
or Top
of Carpet
See Note
13
3
/
4
"
(349mm)
Wall Sleeve
Room
Cabinet
Subbase
16"
(406mm)
17"
(432mm)
Figure 17. Frame and brick with cord connection
3" Min. (76mm)
Wall
Receptacle
(by others)
Figure 18. Frame and brick with hydronic subbase
Mounting
Screws
by Installer
Outdoor Louver
Steel Lintel
(by others)
Hydronic
Heating
Coil
16"
(406mm)
8
1
/
4
"
(209mm)
13
3
/
4
"
(349mm)
Caulk Perimeter
both Indoors
and
Outdoors
Before Installing
Louver
Subbase Side
Channel
Alternate
Electrical
Connections
Hydronic Subbase
8
1
/
4
"
(209mm)
Room
Cabinet
Wall Sleeve
17"
(432mm)
Leveling Leg
Steel Lintel
(by others)
16"
(406mm)
8
1
/
4
"
(209mm)
13
3
/
4
"
(349mm)
Room
Cabinet
Wall Sleeve
17"
(432mm)
Mounting
Screws
by Installer
Outdoor
Louver
Caulk Perimeter
Finished Floor
or Carpet
Installation of Basic Wall Sleeve
