2
、
Do not wash with hot water (above 40 ), otherwise some parts of the unit may be deformed.
ć
Before the seasonal use
1
、
Check that nothing blocks the air inlet and outlet of the indoor and outdoor unit.
2
、
Running the unit without air filters can cause malfunctions due to dirt or dust. Always install the air filter at
all times.
3
、
Check that drainage hose is not bent or clogged.
4
、
Check that the unit is properly installed.
After the seasonal use
1
、
Switch off the main switch of the power supply.
2
、
Clean the air filters and other parts (by professionals).
3
、
Leave the fan running along for another 2-3 hours to dry out the inside of the unit.
7
Operating Instructions
The cleaning and replacement of the filter is only permitted to be done by the professionals. Before open the
grille to clean the filter, please cut off the power supply and wait unit the fan motor stops.
(1)
The temperature should not be set lower than what you need, otherwise it would result in increase of
energy consumption.
(2)
To distribute cool air throughout the room, adjust the air flow direction as shown by the arrows (see the
picture) to diffuse cool air.
(3)
Clean the air filter every week for higher efficiency.
(4)
Close the window and door while operating the unit to prevent leakage of cooled air to save energy.
(5)
Draw close the curtains or close glass windows when cooling to prevent heat load from sun light which
may cause more electricity cost.
(6)
In case of ineffective ventilation, open the window to ventilate the room air once in a while but not too
long since cooled air will be uselessly drained out.
30
Содержание MQS-24018-CFC216A
