23
Outlook
Features
This controller has a Power LED indicator, IR receiver, a LCD display panel, 5VDC power supply input, and
one or two ways communication input/output port.
v
Cool/Heat/Fan/Dry/Auto modes
v
Auto/High/Med/Low fan speed
v
Temperature operate in °C or °F
v
Room temperature display (optional)
v
Sleep function
v
Swing function
v
Real-time clock and Day display
v
3 Events 7-day programmable timer
v
Error indicator
v
Key lock and Fan lock features
v
Last state memory (Memory backup setting from main board)
v
Override function
4
3
2
1
5
6
7
8
Netware 3
Operating Guide
1. “ON/OFF” Switch
• Press once to start the air conditioning unit.
• Press again to stop the unit.
• The operation lamp next to the key lights up and goes off respectively when the unit is
running or not running.
• Caution : In the case when the ON/OFF key is pressed immediately after the operation is
stopped, the unit will not restart until 3 minutes later to protect the compressor.
2. Selecting Operating Mode
• Press the MODE key to select the type of operating mode. Consecutive press of the key
switches the operation over “COOL”, “HEAT”, “AUTO”, “DRY” and “FAN”
3. Fan Speed Selection
• Press the FAN key until the desired fan speed is achieved.
1. Time display
2. Key lock display
3. Error indication
4. Fan speed display
5. Operation mode display
6. Sleep mode display
7. Air swing display
8. Temperature set display
Содержание M4LC
Страница 1: ...Service Guide Book...
