Page 23
7
FULLY DISABLING AN EPIRB
In the unlikely event that your EPIRB refuses to turn off then it may have a fault.
Procedures for dealing with a faulty EPIRB are covered in section 6 on false alerts; in
simple terms you should do the following:
•
De-activate the EPIRB as described in section 6.2
•
Suppress its signal by removing the antenna and wrapping the EPIRB in
metal foil, as described in section 6.3
•
Leave for 3 days until the battery is used up.
WE DO NOT RECOMMEND ANY OTHER COURSE OF ACTION.
However, if it is absolutely necessary to fully disable an EPIRB (by unplugging its
battery), proceed as follows:
•
Take the EPIRB below decks into a dry area.
•
Locate a cross-headed screwdriver.
•
Unscrew and retain the 3 sealing screws.
•
Lift the lens dome off. This will lift the circuit board.
•
Avoid touching the circuit board if possible
•
Using fingers, unplug the three white battery connectors.
•
The flashing will now cease.
•
Collect all the parts and return them to your nearest service agent.
Содержание SMARTFIND E5
