mcmurdo SMARTFIND E5, Руководство пользователя

Страница: 26 / 52

Page 21
6 FALSE ALERTS
False alerts are a serious problem for the rescue services. About 90% of
EPIRB-initiated distress alerts turn out to be false alerts. If your EPIRB should cause a
false alert, follow the instructions below.
6.1 Stand down rescue services
It is most important that you contact the nearest search and rescue authorities and tell
them it was a false alert, so that they can stand down any rescue services. Use any
means at your disposal to make contact. Often this can be by VHF radio to the local
coastguard or mobile phone if you are within coastal range, but MF/HF DSC and
Inmarsat A, B, C, M may also be used.
Useful contacts:
Country Region Telephone What to report
Atlantic / Gulf of Mexico (757) 398-6390
Pacific (510) 437 3700
USA
From any location (800) 323 7233
UK From any location 01326 317 575
EPIRB Unique ID (UIN)
Vessel name/ID
Date, time & duration
Cause of activation
Location when activated
6.2 Turn off the EPIRB
If the EPIRB was activated by mistake, then turn it off:
•
Remove the EPIRB from any water and dry its sea switch contacts.
•
Wait about 8 seconds for the sea switch to de-activate.
•
If the EPIRB is still flashing then it must have been turned on manually
•
Slide the activation switch fully to the right.
•
The EPIRB should now stop flashing.
•
Refit the EPIRB correctly into its mounting bracket or enclosure.
Modern EPIRBs have sea switches and it is not uncommon for the sea switch to
activate in rough seas or heavy rain simply because the EPIRB has been badly fitted
in its mounting bracket. The EPIRB bracket contains a magnet to hold the EPIRB in
an off state. If the EPIRB is wrongly fitted the magnet has no effect, so heavy seas
may activate the sea switch. The cure is to ensure the EPIRB is correctly fitted as
shown in section 5.8.