McLelland MAP-1200PRE, Руководство пользователя

Страница: 13 / 26

13
The controller and APP are easy to install and connect to the local network,
simply connect the RJ-45 IN port to the router via Cat5 cable, and also make
sure your smart devices connect to the same local network. After connecting the
controller to the router by Cat5 cable, the controller will connect with the local
network automatically.
In case, having the problem for connecting to the network, please check the
position of switches on the rear panel.
INTEGRATED NETWORK
1.Open the IE web browser of PC, log in to the WEB configuration page of local
Router to find the IP address of MAP-1200PRE (shown as below)
Please switch to MASTER and ETHERNET.
Note. Please do not press “Reset” button.
Note. Please do not connect the Ethernet port of MAP-1200PRE to the computer
directly.
MAP-1200PRE