McLelland MAP-1200PRE, Руководство пользователя

Страница: 12 / 26

12
CONNECTION DIAGRAM
There are two RJ-45 jacks on the rear panel of this amplifier for the connection to
Ethernet.
Please use a good quality Cat5e/5 cable, and follow the connecting diagram
below.
1. Connect the LAN port on the rear panel of controller to the local Wi-Fi Router.
The Ethernet connection mainly for Wi-Fi control via APP or other control devices.
2. Connect another port (TO DEVICE) on the rear panel of controller to the smart
TV or other Network devices.
The port simply works as SWITCH function as long as the LAN1 port enabled to
Ethernet.
Note: When controlling via ETHERNET, please make sure the ETHERNET/RS232
switch is set at ETHERNET position.
ETHERNET PORTS INSTRUCTION
MAP-1200PRE