CX-153 MONO FOURTH-WAY
When mono fourth-way operation is desired with the CX-153 there is no patch cords required. Plug the line-in
into INPUT 1. Attach cable from LOW OUT 1 to the sub frequency amplifier. Do not anything into HIGH
OUT 1 or INPUT 2. Mode switch push mono. These jacks are automation normallled when nothing is plugged
into them. Attach a cable LOW OUT 2 to the LOW amplifier. Attach a cable from MID 1 to the midrange
frequency amplifier. Attach a cable from HIGH 1 to the high frequency amplifier.
(CAUTION: JUST PLACE INTO MONO ON MODE SWITCH PUSH.)
INPUT 1- MAIN INPUT LEVEL CONTROL
LOW 1-
MID 1 - MID FREQUENCY AMPLIFIER LEVEL CONTROL
HIGH 1- HIGH FREQUENCY
LOW/MID FREQ. 1-MID OUTPUT RANGE ,LOW CUT OFF FREQUENCY.
MID/HIGH FREQ 1-MID/HIGH FREQ.
INPUT 2- SET TO 0
LOW 2- SUB FREQUENCY AMPLIFIER LEVEL CONTROL
MID 2- LOW FREQUENCY
HIGH 2- SET TO 0 AND
LOW/MID FREQ 2- SUB/LOW FREQ.
MID/HIGH FREQ 2- LOW OUTPUT RANGE, HIGH CUT OFF FREQUENCY.
SET TO 0 AND LOW 1 MUTE
AMPLIFIER LEVEL CONTROL
AMPLIFIER LEVEL CONTROL
SOURCE
LINE-IN
HIGH AMP
1
0
POWER
LOW AMP
1
0
POWER
MID AMP
1
0
POWER
1
0
SUB AMP
1
0
POWER
6
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
