OPERATION
READ BEFORE USING
Caution: The following must be observed to prevent malfunctioning and /or possible equipment damage.
1.Before plugging the unit into the main AC line, make sure that all of the equipment following the he crossover
output lines is turned off or all of the inputs are turned down.
2.The unit should be plugged in only when it has been established that main AC line is supplying the correct
voltage and frequency.
3.Never change the frequency range switch from the x10 to x1 position (or vice versa) with the crossover
output levels passing signal. Transients can result and speaker damage is possible.
The CX-152,CX-153andCX-154 are fourth order linkwitz-Riley electronic crossovers. These units can be
used in a wide variety of operation models, as shown below.
Description
CX-152
STEREO 2-WAY
MONO 3-WAY
CX-152
CX-153
CX-154
1
All inputs and outputs are floating and balanced when connected(via a tip,ring,) to other floating and balanced
equipment. Any combination of balanced and unbalanced operation is permitted
1
22
32
24
33 35 26
27
32
33
31
36 37 38
29
21 2 20 5 34 9
20 10 21 11 20
20
14 34 18
19
1
21
2
5
7
20
8
21 11
20
20
14
15 16
19
6
20
10 20
20
17
22 32 23
35
33
27 32
33
31
36 37 38
28
24
32
26
32
29
1
21
2
4
7
20
8
12
11
20
20
13
15
19
6
10
20
20
22 32 23
25
27
32
30
31
36 37 38
28
24
26
32
29
3 20
5
20
17 20
16
14
32
32
33
32
33
CX-153
STEREO 3-WAY
MONO 4-WAY
CX-154
STEREO 4-WAY
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
