CX-152 MONO THREE-WAY
When mono three-way operation is desired with the CX-152 there is no patch cords required. Plug the line-in
into INPUT 1. Attach cable from LOW OUT 1 to the low frequency amplifier. Do not anything into HIGH
OUT 2 or INPUT 2. Mode switch push mono. These jacks are automation normalled when nothing is plugged
into them. Attach a cable LOW OUT 2 to the midrange amplifier. Attach a cable from high to the high
frequency amplifier.
(CAUTION: JUST PLACE INTO MONO ON MODE SWITCH PUSH.)
INPUT 1-
MAIN INPUT LEVEL CONTROL
LOW 1-
LOW FREQUENCY AMPLIFIER LEVEL CONTROL
HIGH 2-
SET TO 0 AND HIGH MUTE
FREQUENCY 1- SET TO "X1" LOW/MID FREQ. CONTROL
INPUT 2-
SET TO 0
LOW 2-
MID FREQUENCY AMPLIFIER LEVEL CONTROL
HIGH 2-
HIGH FREQUENCY AMPLIFIER LEVEL CONTROL
FREQUENCY 2-
SET TO "X10" MID/HIGH FREQ. CONTROL
SOURCE
LINE-IN
RIGHT
RIGHT
LEFT
LEFT
HIGH AMP
VOL
VOL
1
0
POWER
LOW AMP
1
0
POWER
LOW AMP
1
0
POWER
1
0
4
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
