McIntosh MXA80, Руководство пользователя

Страница: 21 / 32

21
change/adjustment in the
Trim Setting. To verify
a TRIM Setting without
changing it, press the
INPUT Control and then
Rotate the INPUT Con-
trol to select the desired
Trim Function. After ap-
proximately 5 seconds the
Display returns to indicate
the Input Selection and
Volume Level.
BASS BOOST
The Intensity of the Low
Frequencies in the music
can be increased by us-
ing the Bass Boost Trim
Function. To make an adjustment perform the follow-
ing:
1. Momentarily press the Front Panel INPUT Control
to enter the TRIM Mode. Then rotate the INPUT
Control until “BASS BOOST, 0dB” appears on
the Front Panel Display. Refer to figure 53.
2. Rotate the OUTPUT Control to change the Bass
Boost, the range of adjustment is from 0dB to
+12.5 dB in 2.5 dB steps. Refer to figure 54.
or press the appropriate push-button on the Remote
Control. Refer to figures 50 and 52.
Volume Control
Rotate the Front Panel VOLUME Control or use the
Up (
+
% Z! *
-
%  ‹ #
Control for the desired listening level. Refer to figures
50 and 52.
Trim Functions Introduction
The MXA80 has various Trim Selections with Ad-
justments. The Trim Functions include Bass Boost,
‡ [ *‚ ]#% ^) ^
‡ Z& *‚#% Z }
*Z& ‚#% ] ‡ ‡ ‡ [
*‚ ]#% ^) ]#
in memory independently for each Input Selected; the
other Trim Settings are the same for all inputs.
The selection and adjustment of all Trim Functions
may be performed by first momentarily pressing the
Front Panel INPUT Control. Then rotate the INPUT
Control to select the desired Trim Function. This is
followed by rotating the OUTPUT Control to make a
Power On and Off
The Red LED beside the STANDBY/ON Push-button
lights to indicate the MXA80 is in Standby mode.
To switch ON the MXA80, press the STANDBY/ON
 ‹ ” 
*!%
Push-button on the Remote Control. The MXA80
will go through a brief startup initialization, with the
Front Panel Display indicating the last used input and
volume setting. This is followed by the volume setting
indication starting at zero and then increasing to the
last used volume setting. Refer to figures 50, 51 and
52. To switch OFF the MXA80, press the STANDBY/
ON Push-button on the Front Panel or the OFF Push-
button on the Remote Control.
Note: For an explanation of the Remote Control
Push button functions, refer to pages 14 and 15.
Source Selection
Rotate the INPUT Control to select the desired input
How to Operate the MXA80
Figure 50
How to Operate the MXA80
Figure 52
Figure 53
BASS BOOST
0dB
Figure 54
BASS BOOST
+2.5dB
Figure 51
UNBAL 20%
SPEAKERS