McIntosh MXA80, Руководство пользователя

Страница: 17 / 32

17
3. Next, rotate the INPUT CONTROL Clockwise
again until the Front Panel Display indicates
“INPUT: UNBAL, NAME: UNBAL” Refer to
figure 3.
4. Rotate the INPUT CONTROL Clockwise again
to select other Setup Functions. Refer to pages 18
thru 20.
5. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display. Refer to figure 1.
Your McIntosh MXA80 has been factory configured
for default operating settings that will allow immedi-
ate enjoyment of superb audio without the need for
further adjustments. If you wish to make changes to
the factory default settings, a Setup Feature is pro-
vided to customize the operating settings using the
Front Panel Display. Refer to the MXA80 Front Panel
Illustration on the previous page while performing an
introduction into operating the Setup Mode, follow the
steps below.
Note: If the MXA80 is currently On, proceed to step
2.
1. Press the STANDBY/ON Push-button on the Front
 *!%  ‹
Remote Control to switch On the MXA80. The
MXA80 will go through a brief startup intializa-
tion with the Front Panel Display indicating the
last used input and volume setting. This is fol-
lowed by the volume setting indication starting at
zero and then increasing to the last used volume
setting. Refer to figure 1.
2. Press and hold in the INPUT CONTROL until the
Front Panel Display indicates “MXA80 V . ,
S/N: AEU ”. The information indicated on the
Front Panel Display includes the Model Number,
Firmware Version and the Serial Number for this
unit; see page 18 for additional information. Refer
to figure 2.
How to Operate the Setup Mode
The Default Settings Chart below indicates the Func-
tion Name, Default Setting and the Page Number for
additional information.
Default Settings
Default Settings
Function Name Setting Page No.
MXA80
V .
S/N: AEU
18
INPUT NAME
* ‚ #%
INPUT:
NAME:
18
SPEAKER MODE Large 19
SUBWOOFER MODE Disabled 19
POWER MODE
*} '%
Enabled 20
REMOTE CONTROL Enabled 20
VOLUME GUARD Enabled 20
FACTORY RESET
*• \] %
20
Setup
Note: Setup Mode operations should be performed
in the order they appear in the Setup Menu as
they are interactive.
Figure 1
UNBAL 20%
SPEAKERS
Figure 3
INPUT: UNBAL
NAME: UNBAL
Figure 2
MXA80 V_.__
S/N: AEU____