McIntosh MX160, Руководство пользователя, Страница: 30 / 44

30
above the STANDBY ON Push-button should now be
illuminated. Refer to figure 51.
Notes: 1. After the Rear Panel rocker switch is placed
in the ON position, the MX160 will switch On
for a few seconds while it checks the current
firmware status and will then switch Off.
2. If the MX160 A/V Processor is not going to
be used for an extended period of time, please
place the Rear Panel Main Power rocker
switch in the OFF position.
Power On and Off
Press the STANDBY/ON Push-button on the Front
Panel or press the (Power On) Push-button on the
Remote Control. Refer to figures 50 and 54. The LED
located above the STANDBY ON Push-button will
turn off and the Front Panel Information Display will
indicate “McIntosh, MX160” during the initializing
process. Refer to figure 52.
When the initialization process is over, the display
will indicate the last Source Selected, Voicing Mode
(equalization/tone adjustment) and the Volume Level.
“HDMI 1, Neutral 12%” is the factory default setting.
Refer to figure 53.
Input Selection
The INPUT Control selects the desired source (42 In-
puts) and is indicated on the top line of the Front Panel
Information Display. Refer to figure 53. The selection
of the sources may also be accomplished by pressing
the
p
Up or
q
Down Push-button on the Remote
Control. Refer to figure 54.
Notes: 1. In addition to 42 direct connection Inputs the
MX160 has an additional 117 assignable Phan-
tom Inputs, each Input with its own name and
other settings assigned to it.
2. For additional information on assigning In-
puts, re-naming Inputs, changing the order in
which they are displayed, activating the HDMI
ARC (Audio Return Control) and removing
unused Inputs from the Input selection op-
eration, refer to the “SETUP” section of this
Owner’s Manual starting on page 17.
Volume Control
Adjust the VOLUME Control to select the desired
listening level. The Volume Control adjusts all chan-
nels simultaneously, and level is indicated from 0 to
99% on the bottom line (right side) of the Front Panel
Information Display. The Volume Level adjustment
may also be accomplished by pressing the VOL
p
Up
or
q
Down Push-button on the Remote Control.
How to Operate the MX160
The McIntosh MX160 has been factory configured
for default operating settings, allowing for immedi-
ate enjoyment of superb video and high fidelity audio
without the need for further adjustments. If you wish
to make changes to the factory default settings, refer
to the SETUP Section of this Owner’s Manual starting
on page 17.
Note: It is advisable to perform “Speaker Configura-
tion” and “RoomPerfect” to ensure the best audio
performance. Refer to pages 20 thru 22 and page
28.
The MX160 has a Rear Panel Main Power rocker
type switch. This switch removes all AC Power from
the MX160 circuitry. It is useful to remove AC Power
when the unit will not be used for an extended period
of time, during lightning
storms or AC Power out-
ages. Referring to figure 50,
the rocker switch is placed
in the OFF position when
shipped from the factory.
Place the Main Power rocker
switch to the ON position. The Front LED located
Figure 51
Figure 52
McIntosh
MX160
HDMI 1
Neutral 12%
Figure 50
Figure 53
HDMI 1
Neutral 12%