McIntosh MX160 Скачать руководство пользователя страница 3

Страница: 3 / 44

Trademark and License Information

The McIntosh MX160 incorporates copyright pro-

tected technology that is protected by U.S. patents and

other intellectual property rights. The MX160 uses the

following Technologies:

This item incorporates copy protection technology

that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engi-

neering and disassembly are prohibited.

Trademark Logo

License Information

Manufactured under license from Auro Technologies.

Auro-3D

and the related symbols are registered

trademarks of Auro Technologies. All materials

contained in this work are protected by copyright law

and may not be reproduced, distributed, transmitted,

displayed, published or broadcast without the prior

written permission of Auro Technologies NV or in case

of third party materials, the owner of that content. You

may not alter or remove any trademark, copyright or

other notice from copies of the content.

Auro Technologies: mail [email protected],

phone +32-(0)-14314343, fax +32-(0)-14321224, www.

auro-technologies.com.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Atmos, Dolby Surround, and the

double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. DTS,

the Symbol, DTS in combination with the Symbol,

DTS:X, and the DTS:X logo are registered trademarks

or trademarks of DTS, Inc. in the United States and/or

Manufactured under license under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;

7,212,872; 7,333,929; 7,392,195; 7,272,567 & other

U.S. and worldwide patents issued & pending. DTS-

HD, the Symbol, & DTS-HD and the Symbol together

are registered trademarks & DTS-HD Master Audio is

a trademark of DTS, Inc. Product includes software. ©

Trademark Logo

License Information

HIGH-DEFINITION MULTIMEDIA INTERFACE

HDMI, the HDMI Logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United

States and other countries.

Manufactured under license from Lyngdorf Audio

A/S. ROOMPERFECT is a registered trademark and

the ROOMPERFECT logo is a trademark of Lyngdorf

Audio A/S. (C) Lyngdorf Audio A/S 2009.

Содержание MX160













































Результаты поиска

Содержание MX160

Отзывы:

McIntosh MX160, Руководство пользователя, Страница: 3 / 44

Результаты поиска

Содержание MX160

Отзывы: