background image

7

Rear Panel Switches and Connections

Rear Panel Switches and

Connections

Connect the MSD4 power

cord to a live AC outlet.

Refer to information on the

back panel of your MSD4

to determine the correct

voltage for your unit

The six outputs feed audio

signals to the matching in-

puts on a Control Center or

power amplifier.

L SUR (Left Surround)

R SUR (Right Surround)

CENTER (Center)

SUBWOOF (Subwoofer)

L FRONT (Left Front)

R FRONT (Right Front)

Receives signals from

a stereo analog signal

source

Set the FP SENSOR (Front Panel Sen-

sor) slide switch to the OFF position

when the MSD4 is being used in a

system with a C39 or MX130. Set the

FP SENSOR slide switch to the ON

position when the MSD4 is being used

as a stand alone decoder together with

an MVS-3, MC7205 and SL-1 in a

simplified surround system

The DATA IN jack re-

ceives operating signals

from the SUM DATA out

of a McIntosh C39 or

MX130. The DATA

OUT jack sends signals

on to another McIntosh

component

When the MSD4 is being used in a system with

a C39 or MX130 the POWER CONTROL IN

receives turn on and off signals from the McIn-

tosh Control Center.The POWER CONTROL

OUT jack sends a turn on and off signal out to a

McIntosh Power Amplifier

AUTO (Automatic) switches the built-

in calibration test signal generator to

each of the six channels in 2 second

intervals on a continuous basis. MAN

(Manual) system calibration requires

the manual selection of each channel

The SPEAKER SETTINGS switches adjust the

bass frequency response to the correct frequency

ranges to match the sizes of the front, center and

surround speakers. If any speaker in the system is

classed as small, frequencies from 80Hz and

lower can be switched to the subwoofer output.

Set the SUBWOOF switch to ON only when a

subwoofer is used in the system

Receives a signal from the

Optical Output of a com-

ponent with a digital au-

dio output

Receives RF signal

from a Laser Video

Disc Player reproduc-

ing a Dolby Digital

(AC-3) sound track

Receives a signal

from the Coaxial

Output of a compo-

nent with a digital

audio output

www.freeservicemanuals.info

5/10/2017

Digitized in Heiloo Netherland

Содержание MSD4





















Отзывы: