McIntosh MCLK12, Руководство пользователя

Страница: 11 / 16

11
Setting the Time
The internal time keeping circuitry of MCLK12 is
always active when the clock is connected to a live
AC Outlet. The correct time needs to be manually set
when the clock is conected for the first time. To set the
current time perform the following:
1. Press and hold in the TIME ADJUST Control
until only the Meter indicating
HOURS is illuminated. Refer to
figures 10 and 11.
2. Rotate the TIME ADJUST Control
clockwise or counterclockwise to
set the current Hour on the Meter.
3. Press in the TIME ADJUST
Control once and the Meter indicat-
ing MINUTES will now be illuminated. Refer to
figures 10 and 12.
4. Rotate
the TIME
ADJUST
Control
clockwise
or counter-
clockwise
to set the
current
Minute on
the Meter.
5. Press in
the TIME
ADJUST
Control
once and both Meters will now be illuminated
displaying the current time.
Front Panel Illumination
When the MCLK12 is connected to a McIntosh Pre-
amplifier, A/V Control Center, Integrated Amplifier
or A/V Receiver via the Power Control Connection,
the Front Panel Illumination of the clock will go On/
Off with the McIntosh Component.
The clock will continue to display the current time
even when the Front Panel Illumination is Off. If the
McIntosh Component offers remote control of meter
illumination via the Power Control Connection the il-
lumination of the Meters on the clock will also go On/
Off.
The MCLK12 Front Panel METER LIGHTS
Control also allows control of Meter and Front Panel
Nomenclature Illumination. To select Meter and No-
menclature Illumination perform the following steps:
1. Rotate the METERS LIGHTS
Control to switch the Meter illumi-
nation On/Off. Refer to figures 11,
12 and 13.
2. Press the METERS LIGHTS Con-
trol to switch On/Off illumination
of the Meter and Nomenclature.
How to Operate the Clock
Figure 10
Figure 11
Figure 12
Figure 13
How to Operate the Clock