McIntosh MCD 7009, Руководство пользователя

Страница: 22 / 25

IF YOU
NEED HELP
PROBLEM
No power when power
is pressed.
No playback when
disc is loaded.
No audio output
(or too low level output).
Playback starts when
power is switched on
Only single track
can be played.
No program playback
Mistracking
(sound jumping).
Hum
Noise in tuner.
Remote control unit
operation is impossible
PROBABLE CAUSE
Power plug not inserted
securely.
Disc loaded with
label side down.
Disc dirty.
Connection to stereo
is incorrect.
Compact disc left on
the disc tray
Single button engaged.
Program button
not pressed.
Play button
not pressed.
MCD7009 receiving
vibration or shock
Disc dirty.
Pin-cord plug not
connected securely.
MCD7009 too near tuner.
MCD7009's power switch
set to OFF.
Batteries not inserted in
remote control unit.
REMEDY
Plug in securely.
Load with label side up.
Clean disc surface.
Check connections.
When the power is turned
ON with a disc loaded, the
MCD7009 will start playing
automatically, Remove the
disc from the player.
Press button to disengage it.
Pressed button to display
"PROGRAM"
Press button
Change the installation
position.
Clean disc surface
Re-connect plug securely
Keep a reasonable distance
between them or switch off
the MCD7009's power.
Set switch to ON.
Insert batteries
CAUTION
Since the MCD7009 incorporates a microcomputer, it may not operate correctly because
of external noise, etc. If this happens, turn the power switch OFF, then turn it ON again and
restart operations.
22