McIntosh MCD 7009, Руководство пользователя

Страница: 13 / 25

BASIC OPERATION
1. Press the POWER pushbutton
The front panel teal pushbutton nomenclature will turn on.
2. Press the OPEN/CLOSE pushbutton.
The Red LED above the pushbutton starts to flash and the disc tray will slide out. The front panel
display will indicate "OPEN" Place a disc within the guides, on the tray with the label facing up.
There is a recessed area on the disc tray to accommodate 3 inch (7.6cm) discs.
3. Press the OPEN/CLOSE pushbutton again.
The disc tray will close and the front panel display will indicate "CLOS". The Red LED above the
pushbutton will turn on, to indicate a disc is loaded. This LED will stay on as long as a disc is in
the tray or playing.
The above information is displayed.
Several seconds later, the MCD7009 enters the standby mode.
4. PRESS THE PLAY BUTTON
Disc playback starts from the first track.
CAUTION
Do not force the tray by hand during opening and closing operations.
Do not leave the disc tray open when the MCD7009 is not in use to prevent dirt and dust
from entering the mechanism.
EVEN IF THE DISC TRAY IS OPEN
DIRECT ACCESS PLAY:
By pressing the numeric buttons corresponding to the required track, the tray will close
and play starts from the specified track directly, without your having to press the play button.
Example 1
To play the 5th track:
Press
WHEN THE PLAY BUTTON IS PRESSED
The disc tray will close and playback starts from the first track.
WHEN THE PAUSE BUTTON IS PRESSED
The tray will close and the MCD7009 will enter the pause mode at the beginning of the
first track. The Red LED above the PAUSE pushbutton will turn on to indicate the pause mode
is in effect.
TO STOP PLAYBACK
Press the stop button. The MCD7009 enters the stop mode.
13
HOW TO
OPERATE
Example 2
To play the 21st track:
Press
twice, then