background image

3

1. An optional McIntosh External Subwoofer Rotary Control,

Model Number R1163,

 is available from your McIntosh

Dealer.

2. Do not connect the Amplifier’s Speaker Negative Terminal

Connection directly to the Vehicle Chassis. Failure to observe
this could result in damage to your Amplifier.

3. It is advisable to place an inline fuse as close as possible to

the battery.

4. For additional connection information, refer to the owner’s

manual(s) for any component(s) connected to the MCC302
Amplifier.

5. There is a built-in turn on delay which will mute the speaker

outputs for approximately two seconds when the amplifier is
turned on.

6. It is very important that loudspeaker cables of adequate size

be used in your music system, to ensure that there will be no
power loss or heating. If your loudspeaker cables are 25 feet
(7.62m) or less, use at least 16 Gauge wire size or larger.

7. The MCC302 Line Level OUTPUTs are wired as a “Y”

connection with the INPUTs to pass the input signals on to
additional amplifiers (keep cable lengths as short as
possible). The McIntosh MX406 Control Center is capable of
driving several additional power amplifiers with no
degradation of the signal.

8. The MCC302 can accept speaker level inputs at its Input

Jacks. Refer to the diagram for
connection.

Customer Service

Technical Assistance

Please Take A Moment

Thank You

Copyright 2001 

©

 by McIntosh Laboratory, Inc.

The serial number, purchase date and McIntosh dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:

Serial Number:

Purchase Date:
Dealer Name:

If it is determined that your McIntosh product is in need of
repair, you can return it to your dealer. You can also return
it to the McIntosh Laboratory Service Repair department.
For assistance on factory repair return procedure, contact
the McIntosh Repair Department at:

McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917

If at any time you have questions about your McIntosh
product, contact your McIntosh dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your dealer wish addi-
tional help concerning a suspected problem, you can re-
ceive technical assistance for all McIntosh products at:

McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636

Table of Contents

General Notes

(-) NEGATIVE SPEAKER OUTPUT

(+) POSITIVE SPEAKER OUTPUT

Your decision to own this McIntosh MCC302 Two Channel
Power Amplifier ranks you at the very top among discrimi-
nating music listeners. You now have “The Best.” The
McIntosh dedication to “Quality,” is assurance that you
will receive many years of musical enjoyment from this
unit.

Please take a short time to read the information in this

manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.

Safety Instructions ............................................................. 2
Thank You.......................................................................... 3
Please Take a Moment ....................................................... 3
Customer Service............................................................... 3
Table of Contents ............................................................... 3
Introduction ....................................................................... 4
Performance Features ........................................................ 4
Dimensions ....................................................................... 5
Installation ........................................................................ 6
Side Panel Cooling and Connections ................................ 7
How to Connect for Two Channels ................................... 8
How to Connect with Subwoofer Channel ........................ 9
Top Panel Controls, Displays and Switches .................... 10
How to Operate................................................................ 11
How to Replace the Fuses ............................................... 12
Block Diagram................................................................. 13
Specifications .................................................................. 14
Packing Instruction .......................................................... 15

Содержание MCC302M

















Отзывы: