McIntosh MC7104, Руководство пользователя

Страница: 10 / 20

two channels of a Preamplifier, Control Center, Remote Control System or other similar component
to UNBALANCED INPUTS, 4 and 3. (The MODE Switch must be in the NORMAL position).
MONO / BRIDGED Mode: Connect a shielded unbalanced cable from the unbalanced output of
a single or mono channel of a Preamplifier, Control Center, Remote Control System or similar com-
ponent to the MONO / BRIDGED 3, UNBALANCED INPUT. The UNBALANCED INPUT 4 is inactive
in the
BRIDGED / MONO Mode. ( The MODE Switch must be in the MONO / BRIDGED position).
5. LEVEL, (4 - 3 MONO / BRIDGED)
NORMAL (STEREO) Mode: Adjust the individual channel level controls to the 2.5 Volt setting
when the MC7104 is used with Mclntosh Preamplifiers, Control Centers or Remote Control
Systems. For other applications you may wish to increase or decrease the settings as desired.
(
The MODE Switch must be in the NORMAL position).
MONO / BRIDGED Mode: Adjust the volume level of the combined MONO / BRIDGED
channels 4 and 3, using only the MONO / BRIDGED 3 Level control. (The channel 4 Level
Control is inactive in the MONO / BRIDGED mode.) Set the control to the 2.5 Volt position when
used with Mclntosh accessory components.
(The Mode switch must be in the MONO /
BRIDGED position).
6. MODE, (NORMAL - MONO / BRIDGED)
Set the MODE switch to the desired operating mode for channels 4 and 3.
7. BALANCED INPUTS, (4 - 3 MONO / BRIDGED)
NORMAL (Stereo)Mode: Connect balanced cables from the balanced outputs of two
channels of a Preamplifier, Control Center or Remote Control System to the BALANCED INPUTS,
4 and MONO / BRIDGED 3. (The MODE switch must be in the NORMAL position).
MONO BRIDGED Mode: Connect a balanced cable from the balanced output of a
Preamplifier, Control Center or Remote Control System to the BALANCED INPUT, MONO /
BRIDGED 3. The BALANCED 4 INPUT is inactive in BRIDGED / MONO Mode. (
The MODE switch
must be in the MONO/BRIDGED position).
8. BALANCED INPUTS, (2 - 1 MONO / BRIDGED)
NORMAL (Stereo)Mode: Connect balanced cables from the balanced outputs of two
channels of a Preamplifier, Control Center or Remote Control System to the BALANCED INPUTS,
2 and MONO / BRIDGED 1.
(The MODE switch must be in the NORMAL position).
MONO BRIDGED Mode: Connect a balanced cable from the balanced output of a
Preamplifier, Control Center or Remote Control System to the BALANCED INPUT, MONO /
BRIDGED 1. The BALANCED 4 INPUT is inactive in BRIDGED / MONO Mode. (The MODE switch
must be in the MONO/BRIDGED position).
BALANCED CABLES
Use 2 conductor shielded cables with XLR type connectors for balanced connections. The
MC7104 BALANCED INPUTS use Female XLR connectors installed on the amplifier back panel.
The balanced connecting cable requires a Male XLR connector.
8
REAR PANEL
AND HOW
TO MAKE
CONNECTIONS