McIntosh MC7104, Руководство пользователя

Страница: 12 / 20

14. / 15. OUTPUTS 1, 2, 3 and 4 (LOUDSPEAKER CONNECTIONS)
Refer to the connecting diagrams.
4 CHANNEL CONFIGURATION {Set both channel pair MODE switches to the NORMAL position)
1. Connect a cable from the negative or (-) terminal of each of four loudspeakers to
a (-) speaker OUTPUT terminal on each of the four channels.
2. Connect a cable from the positive (+) terminal of each of the same loudspeakers
to the matching (+) speaker OUTPUT terminal on each of the four channels.
3 CHANNEL CONFIGURATION
(Set one of the channel pair MODE switches to the NORMAL position, and the other MODE
switch to the MONO/BRIDGED position. The output markings for BRIDGED MONO
connections are placed above the markings for the separate channel output connections. The
example shown in the connecting diagram shows channels 1 and 2 as bridged, and 3 and
4 as normal.)
1. MONO/BRIDGED channel pair (1 and 2): Connect a cable from the negative or
(-) terminal of the loud-speaker to the (-). Connect a cable from positive (+) terminal
of the loudspeaker to the (+) MONO/BRIDGED OUTPUT terminal for channel pairs 1
and 2.
2.
NORMAL channel pair 3 and 4: Connect a cable from the negative (-) terminal of
each of the two loud-speakers used with channels 3 and 4, to the negative (-) OUTPUT
terminals for the same channels. Connect a cable from the positive (+) terminal of
each of the two loudspeakers to the matching (+) OUTPUT terminals.
2 CHANNEL CONFIGURATION
(Set both rear panel MODE switches to the MONO/BRIDGED position).
MONO/BRIDGED CHANNELS 1 and 2:
Connect a cable from the negative (-) terminal of the loudspeaker being used with
bridged pair channels 1 and 2, to the MC7104 negative (-) MONO/BRIDGED terminal
for channels 1 and 2. Connect a cable from the positive (+) loudspeaker terminal to
the MC7104 positive (+) MONO/BRIDGED OUTPUT terminal.
MONO/BRIDGED CHANNELS 3 and 4:
Connect a cable from the negative (-) terminal of the loudspeaker being used with
bridged pair channels 3 and 4, to the MC7104 negative (-) MONO/BRIDGED terminal
for channels 3 and 4. Connect a cable from the positive (+) loudspeaker terminal to
the MC7104 positive (+) MONO/BRIDGED OUTPUT terminal.
10
REAR PANEL
AND HOW
TO MAKE
CONNECTIONS