18
Specifications
Frequency Response
+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz (Source dependent)
Total Harmonic Distortion
0.0015%
Fixed Output level
2.0Vrms Unbalanced
4.0Vrms Balanced
Variable Output level
0 - 8.0Vrms Unbalanced
0- 16.0Vrms Balanced
Signal To Noise Ratio (A-Weighted)
110dB
Dynamic Range
100dB
Output Impedance
600 ohms Unbalanced and Balanced
Headphone Load Impedance
20 to 600 ohms
Audio Specifications
Digital Audio Specifications
General Specifications
Power Control
12VDC, 25mA
Power Requirements
Field AC Voltage conversion of the D150 is not pos-
sible. The D150 is factory configured for one of the
following AC Voltages:
100 Volts, 50/60Hz at 30 watts
110 Volts, 50/60Hz at 30 watts
120 Volts, 50/60Hz at 30 watts
220 Volts, 50/60Hz at 30 watts
230 Volts, 50/60Hz at 30 watts
240 Volts, 50/60Hz at 30 watts
Standby Power, less than 0.25 watts
Note: Refer to the rear panel of the D150 for the correct
voltage.
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 3-7/8 inches (9.8cm) including feet
Depth is 16 inches (40.64cm) including the Front
Panel, Knobs and Cables
Weight
13.5 pounds (6.1 kg) net, 28 pounds (12.7 kg) in ship
-
ping carton
Shipping Carton Dimensions
Width is 26-1/2 inches (67.3cm)
Height is 11-3/4 inches (29.9cm)
Depth is 24-1/4 inches (62.2cm)
Digital Input Signal Format
Coaxial and Optical Inputs - SPDIF (PCM
1
)
USB Input - PCM
1
, DSD
Digital Input Sample Rate
Coaxial and Optical: 44.1kHz to 192kHz, 24-Bit
USB: 44.1kHz to 384kHz, 32-Bit (PCM)
DSD64, DSD128, DXD352.8kHz, DXD384kHz
Digital Inputs
Coaxial 1 and 2: 0.5V p-p/75 ohms
Optical 1 and 2: - 15dbm to -21dbm (TOS Link)
USB: USB Type B Connector
1
PCM (Pulse Code Modulation) Digital Signal type used for
CD Discs, etc.