10
McIntosh Power Amplifier
How to Connect for Audio and Data Control
1. Connect Audio Cables from the McIntosh C46 MAIN
Balanced OUTPUTS to the McIntosh Power Amplifier
Balanced INPUTS.
Note: The unbalanced MAIN Audio Outputs and
unbalanced Power Amplifier Inputs may be used
instead of the Balanced Connections.
2. Connect Audio Cables from the McIntosh CD Player
Balanced Audio Outputs to the C46 CD Balanced IN-
PUTS.
Note: The unbalanced Audio Outputs and Inputs may be
used instead of the Balanced Connections.
3. Connect an Audio Cable from a McIntosh Tuner 1 Out-
puts to the C46 TUNER INPUTS.
4. Connect an Audio Cable from a Turntable to the PH
INPUTS, the Turntable Ground Connection to the GND
Grounding Post and slide the AUX/PH Switch towards
the PH Input jacks.
5. Connect an Audio Cable from the C46 TAPE OUT-
McIntosh AM/FM Tuner
McIntosh CD Player
Tape Deck
in
out
To AC Outlet
PUTS to the Record Inputs of a Tape Recorder and
from the C46 TAPE INPUTS to a Tape Recorder Out-
puts.
6. Connect an Audio Cable from the C46 LISTEN PRO-
CESSOR TO to the Inputs of a Signal Processor and
from the C46 LISTEN PROCESSOR FROM to the
Signal Processor Outputs.
7. Connect a Control Cable from the C46 CD DATA
PORT Jack to the DATA IN Jack on the McIntosh CD
Player.
8. Connect a Control Cable from the C46 TUNER DATA
PORT Jack to the DATA IN Jack on the McIntosh
Tuner.
Note: By adding a McIntosh Remote Control Translator to
the C46, non McIntosh Source Devices such as a
Satellite Receiver can be remotely controlled using a
McIntosh Remote Control and Keypad/Sensor.
9. Connect the C46 Power Cord to a live AC outlet.
How to Connect for Audio and Data Control
Turntable
In
Out
Processor
