McHale
Pro Glide R3100
Rear Disc Mower
33
6.2.1 Blade pin replacement
Over time the blades will cut into the blade holder pins and once the pins reach 14 mm,
as shown, they must be replaced. Check this dimension regularly for excessive wear
and when worn, the full set of mower bolt pins should be replaced. Allowing the pins to
wear beyond this point could lead to potential hazard from sudden fracture.
6.3 Gearbox oil
There are several gearboxes on the machine.
WARNING: Ensure the tractor is shut down before changing oil
Ensure that the tractor engine has been shut down, the key has been
removed from the ignition and the brakes have been applied before
changing oil.
NOTE: Oil must be drained & filled after the first 50 hours of use
After the first 50 hours of use, the gearbox oil must be completely drained
and filled with SAE 80W/90 grade oil.
ENVIRONMENT: Safe disposal of oil
Respect the environment! Never spill oil or grease on the ground, never
pour them down the drain and never discard them where they can pollute
the environment. Always take waste materials to a recycling centre.
Gearbox
Capacity
A (A/F Hex)
B (A/F Hex key)
C (A/F Hex key)
PTO right-angle
1.2 L
8 mm key
8 mm
8 mm
Conditioner
2.5 L
19 mm wrench
8 mm
8 mm
Mower bar
6 L
10 mm key (
X
)
8 mm key (
Y
)
(Check mower bar
Type
X
or
Y
)
8 mm (x2)
Drain plate
Blade
