26
4111-0026 — Feb. 2019
© 2019 Systems, LLC
Operating Instructions
OPERATION
1. Before activating dock leveler, ensure lip avoids
contact with transport vehicle sides and cargo. If lip
does not lower to transport vehicle bed, reposition
transport vehicle.
2. Instruct driver to remain at the dock until the
loading or unloading process has been completed.
3. Chock the transport vehicle wheels, or use a
vehicle restraint if available.
4. If necessary, remove any end loads with the
leveler in the stored position.
5. Extend the dock leveler onto the transport vehicle
as follows:
a. Grasp the captured operating handle. See
Figure 13.
b. Pull handle toward you, rotating center plate
back past vertical. Lip plate extend link arm will
engage at this time. See Figure 14.
c. Push forward on operating handle against the
rivet, rotating leveler out onto transport vehicle
bed. See Figure 15.
d. Return handle to stored position.
6. Proceed with loading or unloading.
7. When loading or unloading is finished, remove
leveler from transport vehicle:
a. Grasp the captured operating handle. See
Figure 13.
b. Pull handle toward you, rotating center plate
back until lip clears transport vehicle bed.
d. Return handle and leveler to stored position.
8. Remove chocks from transport vehicle wheels, or
release the vehicle restraint if used.
9. Indicate to driver that the transport vehicle may
leave the dock.
Note:
Leveler will automatically return to the stored
position if not stored manually as instructed in step 7..
Figure 13
Figure 14
PUSH OUT
Figure 15
EXTEND LINK ARM
PULL IN
RIVET
