13
4111-0026 — Feb. 2019
© 2019 Systems, LLC
Springs must be adjusted after install to ensure
correct operation and preserve unit warranty.
Securely block or support ramp and lip when in
vertical positions. Lack of proper bracing can result
in ramp dropping during adjustment or installation.
Flush Mount - Weld On (continued)
INSTALLATION
Note:
1. Top of base plate to be 1/4” below top of dock
floor and embedded channel to create level
transition when installation is complete.
2. Apply continuous bevel weld across both bumpers
and length of base plate.
Figure 6
