Connect garden hose and water
supply. Let the water run through
the hose.
Makes sure the ON/OFF switch is
in the OFF position.
Unlock the safety trigger on the
spray gun and press the trigger to
pull the water through the machine,
until a steady stream of water runs
from the lance.
Detergent can only be used in
combination with the adjustable spray
lance in the low pressure setting.
Detergent can't be used with turbo
lance provided.
Install the inlet male connector,
connect garden hose (non-supplied)
and inlet connector, and turn the
water on.
1. ASSEMBLE
2. PREPARE
3. OPERATE
1
2
3
4
5
6
7
8
12
13
14
15
16
9
11
10
Connect to mains power. We
recommend to use a RCD device.
Insert the spray lance into spray gun,
and twist 1/4 turn to lock in position.
Check that it is firmly securely located
in place.
Special pressure washer
detergents can be used to increase
the cleaning power of the pressure
washer.
Jet spray adjustment is very aggressive.
Do not adjust while spraying. Switch the
machine off when interrupting your work
for extended periods of time.
Pull the trigger on the spray gun to
release a pressured water spray.
Power on the pressure washer.
