McGREGOR MCT1825, Оригинальное руководство пользователя

Страница: 12 / 24

Customer helpline 0345 605 2065
12
Assemble
Assembling instructions
Always take care when removing the packaging to prevent damage to you or to the grass trimmer.
IMPORTANT! Before assembling the grass trimmer, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the grass trimmer if you
observe any damaged components.
NOTE: Before using the tool, read the instruction book carefully.
INTENDED USE
The machine is intended for the cutting of grass and weeds under bushes, as well as on slopes and
edges that can not be reached with the lawn mower.
1. FITTING THE GUARD (See Fig. A1, A2, A3)
1) Remove the pre-assembled mounting screw from safety guard, see fig A1.
2) Attach the safety guard to the trimmer head, align the guard so it slides into the slots located on
the trimmer head, see fig A2.
3) Secure the safety guard onto the trimmer head with the screw provided, see A3.
WARNING!
Take great care when doing this as the guard has a very sharp cutting
edge.
Never operate the tool without the guard properly in place. Use of the unit without having installed
the guard will cause the motor to overheat, and void the warranty.
A1 A2
A3