McGREGOR MCT1825, Оригинальное руководство пользователя

Страница: 13 / 24

Customer helpline 0345 605 2065
13
Assembling instructions
Assemble
2. REMOVING THE BLADE PROTECT LABEL (SEE FIG. B)
The blade is covered with a protect label. Please remove it before operation.
B
3. TO CHARGE THE BATTERY (See Fig. C)
Chargers and batteries are specifically designed to work together. Do not attempt to use batteries with
any other charger than that specified in these instructions.
Important notes for charging the battery:
In a warm environment or after heavy use, the battery pack may become too hot to permit charging.
Allow time for the battery to cool down before recharging.
BEFORE USING YOUR CORDLESS GRASS TRIMMER, YOU MUST FULLY CHARGE THE
BATTERY
Your battery pack is UNCHARGED and you must fully charge before use.
HOW TO CHARGE THE BATTERY:
A discharged battery at normal ambient temperature will take
approximately 3-5 hours to reach full charge.
WARNING:
When battery charge runs out after continuously use or exposure to
direct sunlight or heat, allow time for the battery pack to cool down before
re-charging to achieve the full charge.
4. TO REMOVE OR INSTALL BATTERY PACK (See Fig. D)
1) Depress the battery pack release button to release battery pack from your grass trimmer.
2) After recharging, insert the battery pack into grass trimmer’s battery port. A simple push and slight
pressure will be sufficient.
WARNING!
The guard must always be on the tool to protect the user.
C
D
1
2
CHARGING INDICATOR
Light Status
Red on Charging
Green on Fully Charged