McFarlane WDL-2100 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 57

McFarlane WDL-2100 Скачать руководство пользователя страница 13

13

STEP - BY - STEP ASSEMBLY INSTRUCTIONS

Attach the Axles to the Main Frame

1.

Refer to Figures 1A and 1B. Figure 1A shows walking axle with 11L - 15 tires and Figure 1B
shows dual axle with 14L – 16 tires. Bolt the main frame axle assemblies to the frame. Use 5/8”
x 2” bolts and locking hex nuts.

2.

If the hub assemblies (WD-2507) are not installed on the axle assemblies attach them using the
1/2-13 x 3 1/2 bolts and locking nuts. Need to show this, they are not assembled

3.

Mount the wheels with either 11L - 15 or 14L - 16 tires on the main frame axle assemblies.

Figure 1A

Figure 1B

Attach the Hitch, Hitch Storage Bracket, Jack and Safety Chain

4.

Refer to Figure 2. Attach the 10” jack to the A-frame. Attach the base hitch and the hitch
storage bracket using the 1” x 6 1/2” grade 8 bolts and locking nuts.

5.

Attach the hydraulic hose clamps to the storage bracket with the 5/16 x 3 grade 5 bolt.

6.

Attach the Light Plug Storage bracket to the storage bracket using the 1/4 x 1 grade 5 bolts, lock
washers and hex nuts.

7.

Attach the safety chain (CH-1816) using the bushing, safety chain washer, 1” x 3 1/4” grade 8
bolt and locking hex nut.

«
...
11
12
13
14
15
...
»

Содержание WDL-2100


























































Отзывы:

Нет отзывов