15
Attach the wing rests to the square frame. Refer to Figure 4a. Use eight 5/8" x 5" bolts, lock
washers, hex nuts and a wing rest clamp plate on each side of the square frame. Do
not
tighten
yet. The distance (“D” in Figure 4.) from square frame splice plate to the wing rest mounting
plate varies with the model (note that for models HDL-1048 through HDL-1050 the wing rest
is bolted directly to the square frame behind the splice plates):
HDL-1040
HDL-1042 through HDL-1046
HDL-1052 through HDL-1060
22” 6”
55”
SQUARE FRAME
WING REST
D
WITH CLAMP PLATES
LOCK WASHERS,
AND HEX NUTS
5/8" x 5" BOLTS,
Attach the Center Bar to the Square Frame
1.
Attach the center bar to the square frame. Refer to Figure 5. Use the 1 ½” x 7 1/16” (models
HDL-1024 through HDL-1038) or 1 ½” x 11 1/16” (models HDL-1040 through HDL-1060)
hinge pins, ½” x 3” grade 8 bolts, and locking hex nuts.
2.
Attach the ASAE 16” stroke cylinders to the cylinder posts on the square frame. Note the
locations of the ports and the direction of travel.
Содержание HDL-1000 Series
