manualshive.com logo in svg

McFarlane HDL-1000 Series, Руководство оператора и список запасных частей, Страница: 13 / 70

Поделиться
Скачать
McFarlane HDL-1000 Series Скачать руководство пользователя страница 13

 

13

STEP - BY - STEP ASSEMBLY INSTRUCTIONS 

 

Main Frame Assembly

 

 

1.

 

Bolt the Square Frame to the A-frame.  Use 5/8” x 2” bolts (5/8” x 2 ¼ on 1048 through 1060), 
lock washers, and hex nuts. 

2.

 

Bolt the Axle Brackets to the main frame.  Use 5/8” x 2” (5/8” x 2 ¼ on 1048 through 1060) 
bolts, lock washers, and hex nuts.  Note the orientation of the walking axle when installing this 
option and be sure to include the Walking Axle Stop Tube Assemblies as shown. 

3.

 

Attach the hub with spindle to the Axle Bracket using ½” x 3 1/2” grade 8 bolts and lock nuts. 

4.

 

Mount the wheels to the main frame Axle Brackets.  Be sure the valve stem is pointing away 
from the Axle Bracket. 

5.

 

Attach the jack to the A-frame.  

 

Figure 1 

6.

 

Assemble either a clevis hitch (Figure 2) or a pintle hitch (Figure 3) as required by the tractor 
or towing vehicle.  Note the opposite orientation of the base hitch for each hitch type.  Attach 
the hitch assembly to the A-frame with two 1” x 6 ½” bolts and locking nuts. 

 
Note:  Parts have been provided to assemble a clevis hitch or a pintle hitch.  Not all the included 
parts will be needed to assemble either type of hitch.  Be sure to store the extra parts in a safe 
place; they will be needed if one requires the use of the other hitch type. 
 
 
Note: For clarity purposes, the rest of the diagrams will be shown without the main axles and rims.

 

 

Содержание HDL-1000 Series







































































Отзывы:

Нет отзывов